What to do if water gets into the headphones

Headphones contribute to a more comfortable use of the mobile device, and in the player they are a necessary component. If used improperly or in adverse weather conditions, a large amount of moisture may get on the device. With timely and correct measures, the problem can be easily fixed.

First steps if the headphones get into the water

If water gets into the headphones, you must take prompt action. In most cases, the device can be restored while maintaining the functionality and sound quality.

If the device falls into a bathtub, puddle or toilet bowl, first of all, you need to quickly remove the headphones from the water. A mandatory point after removal is to turn off the device. The headphones themselves should be pulled out of the jack.

The next step is to eliminate moisture. This procedure must be carried out on weight. The wire is carefully straightened, the auditory holes go down. The headphones must be gently shaken to remove excess fluid that has got inside the case. The surface itself should be thoroughly wiped to collect water. For this, a soft absorbent material is suitable. This can be a flannel or terry cloth, a multilayer paper towel.

An important point is the drying of the headphones. Experts recommend drying the accessory in a disassembled state, as this will contribute to the complete removal of water. To cope with such an operation without the appropriate skills is very difficult. It should also be noted that not every headset can be taken apart.

If the device can be disassembled, each component is thoroughly wiped with paper or a soft absorbent cloth. The membrane must be carefully inspected in bright light. Stains left over from water can adversely affect sound quality. There will be crackling or noise, the quality of the volume can be significantly reduced.

If there are streaks or drops, gently wipe the surface with soft paper. Actions must be careful, as sudden movements or strong pressure will cause the product to malfunction.

ATTENTION!The use of a hair dryer should be discarded, as the air flow can overdry the inner membrane. This will distort the sound when used.

After carrying out the above steps, the headset parts should be left for several days. Headphones can be placed on rags or a paper towel and periodically turned over. The paper absorbs residual moisture that has penetrated deep into the device.

REFERENCE!In order to speed up the process, the headphones can be placed near the battery. For example, put them on a windowsill. Smooth waves of warm air will positively affect the result.

If it is not possible to parse, the membrane can seriously suffer from water stains. It all depends on the speed of action after moisture and drying quality.

If the headphones are dropped or washed, disassembly is necessary. Rinse all components thoroughly to remove food or detergent residues. Drying is carried out by a similar method.

In most cases, when the headphones are damaged, water also gets on the player or phone. The device must be immediately removed from the water, the battery removed. Remove all stains and drops from the surface, carefully wipe the case itself. To do this, a paper or soft towel is useful. The device can be shaken several times so that the droplets that fall inside are on the surface of the body.

Drying also takes several days. During this period, it is forbidden to turn on the device, insert the battery, charger or headphones. It is better to refrain from cleaning ports with cotton swabs. Cotton wool may remain inside the connectors, and solid parts will damage the contacts.

A hair dryer is useful for removing water inside the case. The appliance should be connected at minimum speed. Collect excess moisture with paper or cloth. After all operations, the device should be left at least three days until completely dry.

Moisture can cause oxidation of the connector pins. To remove plaque, alcohol is suitable. When working, it is better to discard the cotton wool and use a bandage. A thin wooden stick is useful as a rod. The material should be selected optimal in thickness so that the finished tool can be freely inserted and removed from the connector.

On the base of the stick, it is necessary to wrap several layers of the bandage, dip into alcohol. The excess must be wrung out carefully so that moisture does not remain inside. After thorough processing, leave the device to dry completely.

ATTENTION! A hair dryer is useful to speed up the process.

After all operations, you can check the phone or player for performance. The battery is inserted into the socket, the device itself turns on. You can also immediately check the headphones. If after connecting the device does not recognize the headset, specialist advice is required.

Headphones are a must-have addition when buying a mobile device or mp3 player. Moisture on the product can significantly impair its functionality. Following the recommendations and timely actions will help in resolving the problem.